Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Doblò

Model: Fiat Doblo MK 2, 263, Doblo 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Service warning light

See other generations:
Video tutorial

In today's video tutorial, you will see how to reset the maintenance light for the engine oil change on the Fiat Doblò, following the instructions below. First, get into the vehicle and connect your diagnostic tool to the OBD port; then scan or manually enter the make, model, and engine type of your car to allow the computer to communicate with the ECU. Now follow the indicated procedure to reset the service light until it is cleared from the instrument cluster!


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Indicator of the Fiat Doblò
How to Reset the Service Indicator of the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) This brief guide will show you the steps to reset the routine maintenance warning light (service) of the Fiat Doblò. First, get into the vehicle and …
Reset Service Light on Fiat Doblò
Reset Service Light on Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) In this guide, you will find the main instructions to reset the service light for the regular maintenance oil change on a second series Fiat Doblò. F…
How to Reset the Service Light on the Fiat Doblò
How to Reset the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) In today's video, we will see how to reset the service light on the second generation Fiat Doblò. This tutorial also applies to the Opel/Vauxhall Com…

Other guides you may be interested in

Where is the Battery Located in a Toyota RAV4 Hybrid?

In this video, see where the battery is located in a Toyota RAV4 Hybrid, useful in case you need to replace it or perform an emergency start. As shown, it is positioned at the rear of the vehicle, specifically at the base of the right wall of the boot. To access it, first remove the floor panel, then disassemble the right drawer and subsequently the small glove compartment. To remove it, simply unscrew the two bolts of the upper bracket and disconnect both terminals, always starting with the negative.

Watch the video!


by ScegliAuto

More videos