Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Indicator of the Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

This brief guide will show you the steps to reset the routine maintenance warning light (service) of the Fiat Doblò. First, get into the vehicle and connect your diagnostic tool to the OBD port; turn on the instrument panel to allow communication with the engine control unit. Now select the make, model, and engine type, then go to the error section and reset the service light from the instrument panel; once the warning on the instrument panel is reset, disconnect the diagnostic tool.

Posted on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Doblo 263?
How do you reset the Service light on the Fiat Doblo 263?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The Service light turning on, in the Fiat Doblo 263, as well as in any car, means that it is time for a scheduled maintenance, so we just have to pre…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) You can reset the Service light that is shown on the Fiat Doblò by holding down the button located on the bottom left side of the steering column: yo…
How to reset the service light on the Fiat Doblo
How to reset the service light on the Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) To reset the service light, related to maintenance, of the Fiat Doblo, we must first turn on the vehicle's instrument panel and then press the accele…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos