Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the FPS light on the Fiat Doblo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Warning light – error code

The steps to follow to reset the FPS light, that is the inertia switch, of the Fiat Doblo are: - turn on the car's instrument panel; - activate the right turn signal; - deactivate the right turn signal; - activate the left turn signal; - deactivate the left turn signal; Repeat these steps a second time before turning off the car's instrument panel. Resetting the light allows for partial restoration of the control unit. If the light remains on, it means that the engine or the control unit have suffered serious damage, so it is necessary to go to the workshop.

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Fiat Doblò
How to reset the tire pressure light on the Fiat Doblò
Fiat Doblo (2022-2026 / Doblo -3) Below we will see the necessary instructions in order to reset the tire pressure warning light of the Fiat Doblò; before performing the TPMS reset, i…
How do you reset the tire pressure warning light on the Fiat Doblò?
How do you reset the tire pressure warning light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) In order to reset the tire pressure warning light of the Fiat Doblò, you will need to inflate the tires until they reach the recommended pressure val…
How to restore the tire pressure indicator on the Fiat Doblo
How to restore the tire pressure indicator on the Fiat Doblo
Fiat Doblo (2022-2026 / Doblo -3) In the following article, we will see how to reset the tire pressure warning light on the Fiat Doblo in case the light remains on even after adjustin…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the yellow warning light with an exclamation point in a triangle indicate in the Fiat Doblò? Read answer
    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos