Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Fiat Doblo?

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

Resetting the service light on the Fiat Doblo is a very simple and quick operation, let's see how to do it in this tutorial. Before proceeding, ensure that you have completed all the scheduled maintenance work. Start by inserting the key and turning on the instrument panel, then press the accelerator pedal fully down and, at the same time, press the brake pedal 8 times consecutively. Once done, keep the accelerator pressed for 60 seconds, after which you can turn off the ignition and turn it back on to check that the operation has been successful.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Fiat Doblo 2023
How to reset the service light on the Fiat Doblo 2023
Fiat Doblo (2022-2026 / Doblo -3) To correctly and safely complete the manual reset procedure of the service light on your Fiat Doblo third series (year 2023) you only need a few seco…
How do you reset the service light on the Fiat Doblò?
How do you reset the service light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) It will be possible to reset the Service light shown on the instrument panel of the Fiat Doblò by holding down the button with the wrench icon locate…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) You can reset the Service light that is shown on the Fiat Doblò by holding down the button located on the bottom left side of the steering column: yo…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos