Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on the Fiat Doblò?

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Warning light – error code

In this tutorial, you will see how to reset the service on the Fiat Doblò, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. To do this, insert the key, press the accelerator pedal fully down, and simultaneously turn on the instrument panel. At this point, while keeping the pedal pressed, press the brake pedal seven times in quick succession, then wait 60 seconds, turn off the ignition, and wait another 60 seconds with the accelerator still pressed. Finally, release the pressure and start the engine.

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Fiat Doblò
Resetting the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) This guide provides instructions to reset the service light for the routine maintenance oil change on the Fiat Doblò. First, get inside the vehicle a…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In order to reset the Service light on the Fiat Doblò, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on …
How to reset the service light on the Fiat Doblo 2023
How to reset the service light on the Fiat Doblo 2023
Fiat Doblo (2022-2026 / Doblo -3) To correctly and safely complete the manual reset procedure of the service light on your Fiat Doblo third series (year 2023) you only need a few seco…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the yellow warning light with an exclamation point in a triangle indicate in the Fiat Doblò? Read answer
    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos