Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Fiat Doblò service

Model: Fiat Doblo MK 2, 263, Doblo 2 - Years 2009-2021
Part: Warning Light - Car Error Code

In today's video we see how to reset the service warning light in the second generation Fiat Doblò. This tutorial also applies to the twin Opel/Vauxhall Combo. First of all, we carry out the correct maintenance, which is shown in the vehicle's use and maintenance manual. Once this is done, we can proceed by holding down the accelerator pedal and simultaneously pumping the brake pedal 7 consecutive times. We can then turn the ignition key and see that the service light reset will be performed. The parameter will be reset according to the data entered by the parent company in the car.


Posted on 19 September 2024 by ScegliAuto



How to reset the Fiat Doblò service
Fiat Doblo (2000-2009 / MK 1, 223, Doblo 1) In today's video we see how to reset the expired service parameter in the first series Fiat Doblò. We hold down the accelerator pedal and simultaneo
How to reset the Fiat Doblò service light
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) We will see below the main instructions that will allow us to reset the oil change ordinary maintenance light on the Fiat Doblò. First of all, we ge
How to reset the engine oil warning light on the Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, 263, Doblo 2) In this guide we will see the procedure that will allow us to reset the service light of the ordinary maintenance of the oil change of the Fiat DoblÃ

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2009-2021 - How do you reset the Fiat Doblò engine failure warning light? Read Answer
    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read Answer
    • Doblo 2009-2021 - What does the yellow warning triangle with the exclamation point mean on FIAT Doblo? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos