Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Fiat Doblò?

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

To reset the Service light that appears on the instrument panel of the Fiat Doblò, you will need to insert the ignition key into the ignition switch: once the panel is turned on, you can press the accelerator pedal three times all the way down. Once this operation has been completed, you can release the pedals and turn the key in the opposite direction to turn off the instrument panel: turning it on again, you can verify that the light has completely disappeared, effectively ending the reset procedure.

Posted on 9 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) You can reset the Service light that is shown on the Fiat Doblò by holding down the button located on the bottom left side of the steering column: yo…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In order to reset the Service light on the Fiat Doblò, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on …
How do you reset the Service light on the Fiat Doblo 263?
How do you reset the Service light on the Fiat Doblo 263?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) The Service light turning on, in the Fiat Doblo 263, as well as in any car, means that it is time for a scheduled maintenance, so we just have to pre…

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos