Do it yourself
Frequently asked questions about cars and motorcycles

How to Open the Boot of a Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018

In this video, you will learn how to open the boot of a Grande Punto. There are essentially two ways to open the boot. The first is with the remote control, pressing the button with the boot symbol. This way, you can open it from a distance, perhaps to allow access to someone who needs to load or unload something but does not have the key. The other way is manual. On the central control panel, press the first button on the left, and the boot will open. This method allows you to open the boot when the key is in the ignition, so you cannot use it for this purpose.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, in this brief guide, you will learn the steps to open the rear hatch of the Fiat Punto Evo boot in case of an emergency, also applicable to th…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Opening the trunk of the Fiat Grande Punto from the outside is a simple and quick operation that can be done independently. To perform this action, w…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) This video shows how to open the boot of the Grande Punto using the emergency release. Enter the cabin and access the boot lock from inside the boot.…

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the inertia switch on the Fiat Grande Punto? Read answer
    • Punto 2005-2018 - How many km does the Fiat Punto run in reserve? Read answer

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos