Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Video Guide to Removing the Bumper

Model: Fiat Punto - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Rear bumper

See other generations:
Video tutorial

Want to fit a new bumper to enhance your car's appearance? Or do you need to remove it for repairs? Let's see how to do it. First, you will need a Phillips screwdriver, a Torx key, and a jack to lift the vehicle and remove the wheels, giving you more space to work.

Start by unscrewing the 3 cross-head screws located inside the wheel arch, then the Torx screw that connects the bumper to the top of the bodywork.

Repeat the same steps on the opposite side and move to the lower central rear. Unscrew the 2 screws shown in the guide, then open the boot lid and unscrew the 2 screws located at the lower ends.

Now, pull the bumper out of its clips, and the job is complete.


Updated on 1 February 2026 by ScegliAuto


Related tutorials

Removing the Front Bumper
Removing the Front Bumper
Fiat Punto (1999-2011 / MK 2, 188) The guide shows that to remove the front bumper, you need to unscrew two screws with a Torx, a T27, under the bumper, near the wheel; there are also …
How to Remove the Front Bumper on a Fiat Punto
How to Remove the Front Bumper on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) The instructions in this guide will show you the procedure for removing and possibly replacing the front bumper on a Fiat Punto. First, open the vehi…
Instructions for Removing the Rear Bumper
Instructions for Removing the Rear Bumper
Fiat Punto (1999-2011 / MK 2, 188) Removing the rear bumper is very simple and does not require special tools or advanced skills. It is advisable to position the vehicle on a lift and …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos