Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Bumper

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Rear bumper

See other generations:
Video tutorial

Removing the rear bumper is very simple and does not require special tools or advanced skills. It is advisable to position the vehicle on a lift and use appropriate axle stands to remove the rear wheels and gain easier access to the bumper mounting bolts located just beneath the edge of the wing.

Once the rear wheels are removed, unscrew the bolts that secure the bumper to the support bracket along the edge of the rear wing; then move on to the screws located beneath the bumper itself and those along the rear boot closure line; at this point, you can remove the bumper by disconnecting the number plate light connector.


Updated on 13 February 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Bumper from a Fiat Punto Evo
How to Remove the Rear Bumper from a Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Removing the rear bumper is very straightforward, and with the right tools, you can avoid removing the wheels. It is recommended to use a short cross…
Remove Rear Bumper on Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Is the bumper on your Punto broken? Remove the rear bumper and replace it with a new one. Lift the tailgate and unscrew the securing bolts located at…
Removing the Rear Bumper on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video, learn how to remove the rear bumper from the Fiat Grande Punto. First, lift the car as you will need to remove the rear wheel: then, r…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos