Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Window Regulator Clip in the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

If you encounter a malfunction with the electric window regulator in the vehicle, refer to the following instructions: first, remove the door panel and detach the inner lining. Once you have access to the glass sliding mechanism, locate the clip that holds the glass, which has broken.

Proceed to remove the damaged clip by first lifting the glass and then retrieving the new one. Be careful to check how the metal cable is attached to the clip to replicate the position on the new one. After that, attach the new clip, lower the glass, and secure it in place.


Updated on 19 May 2026 by ScegliAuto


Related tutorials

How to Repair the Window Regulator Mechanism on a Fiat Panda
How to Repair the Window Regulator Mechanism on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, you will see the main instructions on how to repair the side window regulator mechanism on a Fiat Panda. First, open the front door of…
How to Repair the Window Regulator in a Fiat Panda 169
How to Repair the Window Regulator in a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) This video explains how to independently repair the window regulator mechanism in a Fiat Panda 169. First, remove the inner door trim panel and the i…
How to Replace the Front Window Regulator on the Fiat Panda
How to Replace the Front Window Regulator on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front window regulator on the Fiat Panda, you need to loosen the screws that secure the door panel: these screws are located at the bo…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos