Do it yourself
| ||||
|
Fiat Panda - Video tutorial
Model: Fiat Panda
MK 2, 169
- Years 2003-2012 In order to replace the front window lifter of the Fiat Panda, you need to loosen the screws that secure the door panel: these screws are located at the bottom of the panel, below the window lifter switch and next to the interior handle. Once all the screws have been loosened, the panel can be removed and access to the underlying components can be obtained: the three screws securing the window lifter can be loosened and the connectors can also be disconnected. This way, the mechanism can be extracted from its housing and replaced with a new one.
Posted on 2 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |