Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Window Regulator Mechanism on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

In this guide, you will see the main instructions on how to repair the side window regulator mechanism on a Fiat Panda. First, open the front door of the vehicle and start removing the door panel by unscrewing all the fastening screws found on the sides; then disconnect the handle cable, levering on the sides to detach and remove the trim.

At this point, unscrew the screws of the side glass bracket, unscrewing the screws of the window regulator mechanism and disconnecting the motor; make the necessary repairs or replacements, then reassemble everything!


Posted on 22 August 2026 by ScegliAuto


Related tutorials

How to Remove the Window Crank Handle of a Fiat Panda
How to Remove the Window Crank Handle of a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the rear door of your Fiat Panda. Begin by inserting the tip of a flat screwdriver into the gap between the window crank h…
How to Repair the Window Regulator Clip in the Fiat Panda
How to Repair the Window Regulator Clip in the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) If you encounter a malfunction with the electric window regulator in the vehicle, refer to the following instructions: first, remove the door panel a…
How to Replace the Front Window Regulator on the Fiat Panda
How to Replace the Front Window Regulator on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) To replace the front window regulator on the Fiat Panda, you need to loosen the screws that secure the door panel: these screws are located at the bo…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos