Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Side Glass on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Side window

Today we will go through the instructions to remove and replace the side glass of the front door on a Fiat Panda. First, open the front door and start removing the door panel and the triangular plastic cover; then remove the glass seal and disconnect the glass from the window mechanism by unscrewing the bracket screws, as illustrated in the video. At this point, you can lift and remove the side glass, being careful of any shards of broken glass; apply the reverse procedure for reassembly!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you repair the side window lifter in the Fiat Panda 169?
How do you repair the side window lifter in the Fiat Panda 169?
Fiat Panda (2003-2012 / 169, MK 2) In this video, we are explained how to proceed independently with the repair of the window regulator mechanism of the side window in a Fiat Panda 169…
Guide to Replacing the External Wing Mirror on a Fiat Panda
Guide to Replacing the External Wing Mirror on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today's steps will show you how to remove and replace the external wing mirror on a Fiat Panda. First, open the front door and begin by removing the …
How to Repair the Window Regulator Mechanism on a Fiat Panda
How to Repair the Window Regulator Mechanism on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide, you will see the main instructions on how to repair the side window regulator mechanism on a Fiat Panda. First, open the front door of…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos