Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on the Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Door trim panel

See other generations:
Video tutorial

As shown in this tutorial, removing the door panel on the Fiat Punto is an extremely simple and quick operation. First, unscrew the two screws located under the large grab handle, then unscrew the single screw inside the opening handle and remove it from the panel.

Next, remove the screws along the entire lower edge, take out the speaker, and disconnect each connector from the window control console. At this point, you can finally unclip the panel from the door starting from the bottom.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel on a Fiat Grande Punto
How to Remove the Door Panel on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide outlines the steps to remove and replace the front door panel of a Fiat Grande Punto, as well as the Punto Evo. First, open the front door…
How to Remove the Panel on Fiat Punto
How to Remove the Panel on Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the door panel of a Fiat Punto? Open the door and let's see how to do it. Unscrew the retaining screws located in the internal handle …
Removing the Rear Door Panel on the Fiat Grande Punto
Removing the Rear Door Panel on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Discover in this video tutorial how to remove the rear door panel on the Fiat Grande Punto, as well as on the Punto Evo. First, open the rear door an…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos