Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door on a Fiat Freemont - Dodge Journey

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Car door

Video tutorial

This video shows how to remove the front door on a Fiat Freemont and Dodge Journey, following the instructions below. First, open the front door and start by unscrewing the nuts from the door bracket or hinge using a ratchet spanner.

Then, hold the door up and remove the small side rubber tube, disconnecting the electrical connectors at the back as shown in the video. At this point, you can completely remove the door.

Reassemble everything afterwards!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

Removing the Front Seat of the Dodge Journey - Fiat Freemont
Removing the Front Seat of the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. which also applies to the driver's seat, of the Dodge Journey and Fiat Freemont. First, open the front door and start unscrewing the fastening screws.. …
Removing the Front Seat on the Dodge Journey - Fiat Freemont
Removing the Front Seat on the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. instructions for removing the front seat on the Dodge Journey, as well as on the Fiat Freemont. First, open the front door and start by removing the.. …
How to Remove the Front Seat of the Dodge Journey - Fiat Freemont
How to Remove the Front Seat of the Dodge Journey - Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) .. replace the front seat of the Fiat Freemont and Dodge Journey. First, open the front door and start by removing the plastic cover on the side of the.. …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos