Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : Replacement of the rear side glass on the Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Side window
Operation: Replacement of the rear side glass on the Fiat 500

In this video tutorial we will see how to remove the panel and the rear side glass on the Fiat 500, following the instructions below. To disassemble the side glass we are going to equip ourselves with a very thin iron wire to be able to insert it between the glass and the gasket; then we proceed with the removal of the glass or the window, as shown in the video. At this point we are going to scrape and clean the side area of the glass, in order to subsequently apply the new gasket; we position the glass correctly and push hard to fix it correctly to the base.


Posted on 16 June 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2007-2021 - Why does the Fiat 500 window lifter not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos