Do it yourself
| ||||
|
Fiat Seicento - Video tutorial
Model: Fiat Seicento
MK 1
- Years 1998-2010 In this guide we will see the steps to disassemble and replace the gear lever of the Fiat Seicento, following the instructions below. First of all, let's get on board the car and start by removing the gearshift gaiter; then we lift the car to reach the box of our gear lever, unscrewing the three screws with a socket wrench, as shown in the video. Now we remove the metal bulkhead of the exhaust manifold, unscrewing the screws with a 10 mm wrench; then let's go to slide out and remove all the gear lever rod, following the video to the end!
Posted on 29 June 2022 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsWhere are the fuses of the Volvo FH located?All the fuses of the Volvo FH are located inside the fuse box located in the vehicle cabin: in order to access the box it will be necessary to unhook the internal fixing clips that block the panel in the upper part of the dashboard, along its entire length. extension. Once this panel has been removed, it will be possible to access the fuses and replace them if necessary: here it will be possible to identify the fuses that take care of the operation of the windshield wipers, the cigarette lighter, the headlights, etc. In the vehicle manual each fuse is indicated with its amperage. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |