Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to change the light bulb on a Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 - Years 2007-2021
Part: Headlight
Operation: How to change the light bulb on a Fiat 500?

IN this simple video tutorial we see how to reach the headlight bulbs of a Fiat 500 and how to replace them. To start, let's open the hood and remove the rubber protection located behind the lighthouse where the bulb to be replaced is, now to remove the bulb holder we have to keep the clip pressed and extract it. Now we have free access to the old bulb which we can remove from the socket and replace it with a new one. To reassemble everything we just have to carry out all the steps in reverse. It is recommended that you do this by first disconnecting the battery.


Posted on 30 June 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2012-2023 - What can be the reason why the daytime running lights on the Fiat 500 do not light up? Read Answer
    • 500 2007-2022 - Why don't the daytime running lights on the Fiat 500 work? Read Answer
    • 500 2007-2022 - What model are the front position light bulbs of the Fiat 500 series 312? Read Answer
    • 500 2007-2023 - How to remove the headlights on Fiat 500? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos