Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Tail Light on a Fiat Mobi

Model: Fiat Mobi MK 1 - Years 2016-2024
Part: Headlight bulb

If you intend to remove and replace the tail light on this vehicle, the following description outlines the procedure to follow. After opening the trunk, locate the tail light that contains the bulb to be replaced and unscrew the two screws located inside the light near the trunk seal. Then, pull the light assembly towards you to extract it from its housing, making sure to disconnect the electrical connectors behind it first. Proceed to replace the entire assembly or simply change the bulb.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Fiat Mobi
How to replace the rear headlight bulbs of the Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) The information provided in this guide will show us how to disassemble and replace the rear headlight bulbs of the Fiat Mobi. First, we open the rear…
How to Replace the Front Bulb in a Fiat Mobi
How to Replace the Front Bulb in a Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) In today's video, we will see how to replace the front bulbs in a Fiat Mobi. First, let the vehicle rest if it has been running for about half an hou…
How to Replace the Ignition Coil in a Fiat Mobi
How to Replace the Ignition Coil in a Fiat Mobi
Fiat Mobi (2016-2024 / MK 1) This guide provides instructions for removing and replacing the ignition coil in a Fiat Mobi, following these simple steps. First, open the hood of y…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos