Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Wheel Controls on the Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Push button

In this video tutorial, you will learn how to remove and replace the steering wheel controls and airbag on the Fiat Grande Punto, as well as the Punto Evo. First, get inside the vehicle and start by removing the airbag by releasing it from the sides; then disconnect the airbag's electrical connector, also removing the connector for the steering wheel controls. Next, unclip the three plastic fasteners for the controls using something thin and pointed; lever them out to replace them with new ones, applying the reverse procedure for reassembly!

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Climate Control Controls on the Fiat Grande Punto
How to Remove the Climate Control Controls on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The instructions in this guide will show you the procedure for removing and replacing the climate control controls on the Fiat Grande Punto, as well …
How to disassemble the airbag and steering wheel of the Fiat Grande Punto.
How to disassemble the airbag and steering wheel of the Fiat Grande Punto.
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today we will look at the instructions on how to disassemble and replace the steering wheel and its airbag on the Fiat Grande Punto and Punto Evo. Fi…
How to Replace the Light Switch on a Fiat Grande Punto
How to Replace the Light Switch on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Decide to replace the light switch controls behind the steering wheel for various reasons, including components that require inspection or replacemen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos