Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Fiat Talento.

Model: Fiat Talento MK 1 - Years 2016-2021
Part: Service warning light

To reset the service light on a Fiat Talento - after completing the services required by the service interval - get into the van, close the doors, and turn on the ignition. At this point, press the lower button on the satellite located on the lever to the right of the steering wheel until you reach the option "range until next service". Keep the same button pressed until this option starts to flash. At some point, the display will show how many miles remain until the next service. Release the button. Turn off the ignition. Now turn it back on to verify. The light will be off.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat Talento
How to Reset the Service Light on a Fiat Talento
Fiat Talento (2016-2021 / MK 1) To reset the service light for the Fiat Talento, follow these steps: - Turn on the vehicle's ignition; - Press and hold the SETUP button located on t…
How to reset the Service light in the Fiat Talento?
How to reset the Service light in the Fiat Talento?
Fiat Talento (2016-2021 / MK 1) Let's see how to reset the Service light in the Fiat Talento, a vehicle for which we have a video presentation attached here. Naturally, this should …
How to reset the maintenance light on the Fiat Talento
How to reset the maintenance light on the Fiat Talento
Fiat Talento (2016-2021 / MK 1) If the maintenance light on your Fiat Talento's instrument panel continues to remain on even after performing the service, don't worry because you ca…

Other guides you may be interested in

    Frequently Asked Questions

    • Talento 2016-2021 - How do you reset the service warning light on the Fiat Talento? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos