Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Freemont
    4. : How to change the automatic gearbox oil on the Fiat Freemont.

Fiat Freemont - Video tutorial

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Gearbox
Operation: How to change the automatic gearbox oil on the Fiat Freemont.

How to change the oil on the automatic gearbox of the Fiat Freemont. First you need to lift the car. Here it is on a bridge, but we can safely lift it even without the need for professional equipment, without trusting too much in our jack. You have to remove the casing that covers the gears and remove the filter that you will have to wash with petrol or replace (the new filter does not exceed 30.00 euros on the major e-commerce platforms; the oil + filter kit costs around 110 euros) and let the used oil drain into a basin, which you will then dispose of properly in an authorized center. This can take several hours. When you have removed all the oil, put the filter and the crankcase back in its place, you can top up the oil from the upper filler. The work is done.


Posted on 1 September 2022 by ScegliAuto

    Frequently Asked Questions

    • Freemont 2011-2016 - How to solve the problem with the automatic transmission of the Fiat Freemont? Read Answer
    • Freemont 2011-2016 - How much does it cost to replace the Fiat Freemont automatic gearbox? Read Answer
    • Freemont 2011-2016 - How does the automatic transmission of the Fiat Freemont work? Read Answer
    • Freemont 2011-2016 - What to do if the automatic gearbox of the Fiat Freemont gives problems? Read Answer
    • Freemont 2011-2016 - How much oil does the automatic transmission of a Fiat Freemont need? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos