Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Automatic Gearbox Oil on the Fiat Freemont

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Transmission fluid

Video tutorial

Open the bonnet and locate the box containing the air filter; to access the automatic gearbox to check and possibly replace the oil level, you need to remove the air filter box. Under the air filter is the gearbox, and on the top left is the filler cap, which you should unscrew.

After that, lift the vehicle, remove the soundproofing panels located under the engine, and locate the lower oil drain plug.

Loosen the plug, ensuring you have placed an oil collection tray on the floor. Wait a few minutes for all the oil to drain out and then refit the drain plug.

Return to the top of the engine bay and proceed to top up with new oil (check the correct specification by referring to the user and maintenance manual). Refit the filler cap and finally reassemble the air filter.


Updated on 14 May 2026 by ScegliAuto


Related tutorials

How to Change the Automatic Transmission Oil on a Fiat Freemont
How to Change the Automatic Transmission Oil on a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) To change the oil in the automatic transmission of the Fiat Freemont, first lift the car. It is on a ramp here, but you can safely lift it without pr…
How to Unlock the Automatic Gearbox of a Fiat Freemont
How to Unlock the Automatic Gearbox of a Fiat Freemont
Fiat Freemont (2011-2016 / MK 1) If the engine fails to start for any reason, you cannot operate the gear lever to move it from the Parking position to Neutral, making it impossible …
…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos