|
Do it yourself
| |||
| ||||
Adjusting the Handbrake on Fiat Grande Punto
Model: Fiat Punto
MK 3, Punto EVO, 199, Grandepunto
- Years 2005-2018
If the handbrake on your Fiat Grande Punto isn't functioning as it should and you have a good level of DIY skills, you can carry out this operation yourself. In this brief video, you will find all the steps to complete the task in just a few minutes. The first step is to remove the cover that conceals the handbrake lever mechanism by pulling it outward, as it is not secured by any screws. At the base of the lever, there is a hex nut that holds a metal plate where the cables that lock the rear wheels converge. This nut controls the tension of the lever; tighten it properly with a 10 mm hex key until the handbrake is correctly adjusted, ensuring it holds the car after no more than 4 clicks.
Updated on 12 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
In this video tutorial, you will learn how to adjust the handbrake on a Fiat Grande Punto by following the instructions below. First, get in the vehi…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
To adjust the handbrake on your car, there are usually two bolts located behind it, hidden by a protective plastic cover, which you can use to set th…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
If your Fiat Grande Punto's handbrake is no longer functioning properly and you have a good level of manual dexterity, this video provides all the in…
Other guides you may be interested in
|
How to replace the horn on a Renault Duster - Dacia Duster
Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.245
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
