Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Fiat Ducato

Model: Fiat Ducato X290 - Years 2014-2026
Part: Door trim panel

In this video tutorial, you will learn how to remove and replace the front door panel of the Fiat Ducato, as well as the Peugeot Boxer. First, open the front door and start by removing the plastic cover located at the top; then, unscrew the fastening screws found on the handle and on the sides of the door panel, as shown in the video. Now, lever the sides of the panel to detach and remove it, disconnecting the handle cable and the electrical connector of the switch panel; then refit the new panel by applying the reverse procedure!

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front door panel of the Fiat Ducato.
Disassembly of the front door panel of the Fiat Ducato.
Fiat Ducato (2006-2014 / X250) This brief guide will illustrate the instructions that will allow us to disassemble and remove the front door panel of the Fiat Ducato. First, we ope…
How to Remove the Door Panel on a Fiat Ducato
How to Remove the Door Panel on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) How do you remove the door panel (driver's side) on a Fiat Ducato? This video explains the procedure. Before starting the disassembly, disconnect the…
How to Remove the Door Panel of a Fiat Ducato
How to Remove the Door Panel of a Fiat Ducato
Fiat Ducato (1981-1994 / ) How to remove the door panel (driver's side) of a Fiat Ducato? This video explains how to proceed. Remove the securing clips located above the door p…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos