Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Control Batteries for Fiat Group Vehicles

Model: Fiat Fiat Various
Part: Key

Video tutorial

Replace the batteries in the remote control for most Fiat group vehicles (Punto - 500 - Bravo - Stilo - Doblò - Panda - Nemo - Qubo - Grande Punto). Use a small flathead screwdriver to remove the small screw located on the side of the remote.

Once unscrewed, extract the housing where the CR2032 battery is located, which can be easily found for a few pounds at any newsagent or supermarket. When refitting, ensure the battery is positioned correctly.

At this point, reinsert the battery into its housing and screw the small screw back in. The job is complete.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Glow Plugs on the 1.9 CDTI - JTD Engine (Opel - Fiat)
How to Replace the Glow Plugs on the 1.9 CDTI - JTD Engine (Opel - Fiat)
Fiat Fiat Various In this video, discover the steps to dismantle and replace the glow plugs on the 1.9 CDTI engine fitted in Opel models, as well as in Fiat and Alfa R…
How to replace the air filter on Fiat and Lancia vehicles
How to replace the air filter on Fiat and Lancia vehicles
Fiat Fiat Various Replacing the air filter on Fiat group cars follows the same procedure as replacing the air filter by the Lancia production company. To replace the f…
How to Replace the Remote Control Battery on a Fiat?
How to Replace the Remote Control Battery on a Fiat?
Fiat Fiat Various In today's video, you will see how to replace the casing of the remote control for Fiat models from the early 2000s. First, remove the manufacturer's…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos