Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Steering Column of the Fiat Panda 4x4

Model: Fiat Panda MK 1, 141 - Years: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991

See other generations:
Video tutorial

This guide will help you understand the steps to dismantle and replace the steering column of the Fiat Panda 4x4. First, get inside the vehicle and start unscrewing the internal screws found at the base of the steering column; then open the bonnet to access the external part of the column, unscrewing the additional screws to disconnect it from the steering box, as shown in the video.

At this point, remove and replace the steering column with the new one, using the original replacement part, following the video tutorial to the end!


Updated on 13 June 2026 by ScegliAuto


Related tutorials

Guide to replacing the steering column of the Fiat Panda
Guide to replacing the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First of all, we…
Removing the Steering Column on the Fiat Panda
Removing the Steering Column on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the steering column or EPS on the Fiat Panda. First, get into the vehicle and start by remov…
How to disassemble the steering column of the Fiat Panda
How to disassemble the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First, we get on board the ca…

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos