Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the steering column of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012

In this guide we will see the main instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First of all, we get on board the car and start disassembling and removing the steering wheel and its airbag, disconnecting the electrical connector and unscrewing the central screw of the steering wheel; then we proceed to remove the steering angle sensor and the turn signal switch, disconnecting the various wiring, as shown in the video. At this point, we proceed with the disassembly of the steering column, disconnecting it from the bottom, following the video tutorial until the end.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Steering Column of the Fiat Panda 4x4
Guide to Replacing the Steering Column of the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) This guide will help you understand the steps to dismantle and replace the steering column of the Fiat Panda 4x4. First, get inside the vehicle and s…
Removing the Steering Column on the Fiat Panda
Removing the Steering Column on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the steering column or EPS on the Fiat Panda. First, get into the vehicle and start by remov…
How to disassemble the steering column of the Fiat Panda
How to disassemble the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First, we get on board the ca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos