Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Steering Column on the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012

This guide outlines the main steps to remove and replace the steering column or EPS on the Fiat Panda. First, get into the vehicle and start by removing the steering wheel and its airbag by disconnecting the electrical connector and unscrewing the central screw. Next, unscrew the screws of the steering angle sensor, then remove the switches for the bulbs and windscreen wipers, as shown in the video. At this point, use a T30 Torx key to remove the ignition cylinder, then proceed to dismantle the steering column, following the video tutorial to the end!

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the steering column of the Fiat Panda
Guide to replacing the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First of all, we…
Guide to Replacing the Steering Column of the Fiat Panda 4x4
Guide to Replacing the Steering Column of the Fiat Panda 4x4
Fiat Panda (1980-2003 / 141, MK 1) This guide will help you understand the steps to dismantle and replace the steering column of the Fiat Panda 4x4. First, get inside the vehicle and s…
How to disassemble the steering column of the Fiat Panda
How to disassemble the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Below we will see the instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First, we get on board the ca…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos