Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering column of the Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First, we get on board the car and start by disassembling and removing the steering wheel and its airbag, pushing on the rear holes of the steering wheel and disconnecting the electrical connector found on the back; then we unscrew the central bolt of the steering wheel, using a socket wrench with an extension, in order to remove it. At this point, we disassemble the steering angle sensor, thus being able to access the steering column; we remove the latter and replace it, following the video tutorial until the end!


Posted on 28 September 2025 by ScegliAuto


Related tutorials

Removing the Steering Column on the Fiat Panda
Removing the Steering Column on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to remove and replace the steering column or EPS on the Fiat Panda. First, get into the vehicle and start by remov…
Guide to replacing the steering column of the Fiat Panda
Guide to replacing the steering column of the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the steering column of the Fiat Panda. First of all, we…
Guide to Replacing the Steering Column of the Fiat Panda 4x4
Guide to Replacing the Steering Column of the Fiat Panda 4x4
Fiat Panda (1980-2003 / MK 1, 141) This guide will help you understand the steps to dismantle and replace the steering column of the Fiat Panda 4x4. First, get inside the vehicle and s…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - Where is the fuel filter located on the Fiat Panda 1.2 169? Read answer

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos