Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Fiat Grande Punto 1.2 8V

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

To replace the air filter, first open the bonnet and remove the air filter box. To do this, unscrew the two bolts on either side of the filter box that hold it in place, disconnect the air hose, and finally disconnect the oil vapour recovery hose. Once this is done, safely extract the filter box. Now unscrew the six screws of the box to open it and replace the old filter with a new one; then close the filter box and refit it by reversing the procedure.


Updated on 14 June 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Fiat Grande Punto
How to Replace the Engine Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to proceed with replacing the engine air filter on a Fiat Grande Punto? Open the car door, pull up the engine compartment release lever located a…
How to Replace the Air Filter on a Fiat Grande Punto
How to Replace the Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Replacing the air filter on a Fiat Grande Punto. Open the car door, pull up the lever to open the engine compartment located at the bottom left of th…
How to Remove the Air Filter Installed on a Fiat Grande Punto
How to Remove the Air Filter Installed on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the air filter installed on a Fiat Grande Punto? Open the car door, pull up the engine compartment release lever located at the bottom …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos