Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

Replacing the air filter on a Fiat Grande Punto. Open the car door, pull up the lever to open the engine compartment located at the bottom left of the dashboard, and lift the front bonnet, securing it with the prop rod. Remove the securing screws from the air box located above the engine soundproofing panel, then uncover the air filter box and extract the worn air filter.

Insert a new filter into the designated housing (ensuring it fits snugly around the walls). Finally, reassemble the air box cover and tighten the screws.

Close the front bonnet after maintenance.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Fiat Grande Punto
How to Replace the Air Filter of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To correctly and safely replace the air filter of your Fiat Grande Punto, follow the instructions outlined below. Before proceeding, remember that th…
How to Set the Time on a Fiat Grande Punto
How to Set the Time on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Before you start, sit in the driver's seat of your Fiat Grande Punto. Begin by activating the instrumentation by turning the key in the ignition swit…
How to Replace the Cabin Air Filter of the Fiat Grande Punto
How to Replace the Cabin Air Filter of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this brief and simple guide, you will see the steps to remove and replace the cabin air filter of the Fiat Grande Punto, as well as the Punto Evo.…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos