Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Air Filter Installed on a Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Air filter

See other generations:
Video tutorial

How to remove the air filter installed on a Fiat Grande Punto? Open the car door, pull up the engine compartment release lever located at the bottom left of the dashboard, and lift the front bonnet, securing it. Open the soundproofing panel of the air (unscrew the filter pins), remove the panel with the air filter box from the vehicle body, then extract the worn filter and insert a new one, ensuring it fits snugly around the walls of the box. Finally, reassemble the air box panel and tighten the screws.

Close the front bonnet after installation.


Updated on 10 March 2026 by ScegliAuto


Related tutorials

How to Remove the Engine Air Filter on Fiat Grande Punto
How to Remove the Engine Air Filter on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the engine air filter on a Fiat Grande Punto? In this video, see how to proceed: open the car door, pull up the engine bay release leve…
Replacing the Cabin Air Filter of the Fiat Grande Punto
Replacing the Cabin Air Filter of the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To trap impurities and prevent them from entering the ventilation system of the Fiat Grande Punto, a filter is mounted on the intake. After fifteen t…
Replacing Air Filter on Fiat Grande Punto
Replacing Air Filter on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, we will see how to remove and replace the air filter on a Fiat Grande Punto. First, open and lift the bonnet of your car and …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos