Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up Oil in a Fiat Panda

Model: Fiat Panda - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Engine oil

See other generations:
Video tutorial

First, check the engine oil level as oil loses its quality over time and gets consumed. Check it every two months or after 1,200 miles.

If the warning light comes on, stop and check the oil level with the dipstick, after a few minutes with the engine off. The car must be parked on a level surface; use a pair of gloves to avoid getting dirty and have a paper towel handy to clean the dipstick; then remove the dipstick, wipe it with the cloth, and reinsert it. Pull it out again and check if oil is needed.

The oil level should be between the two marks.

If necessary, top up with half a litre of oil. Choose an oil recommended by the manufacturer. Then, using a funnel, pour in the oil and close the cap.


Updated on 15 June 2026 by ScegliAuto


Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Change the Transmission Oil on a Fiat Panda
How to Change the Transmission Oil on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Let's replace the transmission oil on a Fiat Panda. Position your Panda on a column lift and raise it to a comfortable height for disassembly. To cha…
Replacing Drive Shaft Boots
Replacing Drive Shaft Boots
Fiat Panda (1980-2003 / MK 1, 141) The boot itself costs only a few pounds, but if it wears out, it risks leaking gearbox oil, causing seizing within a few hours. Unfortunately, the o…

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos