Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

In this tutorial, you will see how to replace the cabin filter in a Fiat Grande Punto, a very simple and quick operation. Start by going to the passenger seat, then unclip the panel located at the joint between the centre console and the dashboard, move the various carpet elements indicated, and locate the long rectangular flap in front of the bulkhead. Once done, unscrew the lower screw of the flap, open it, and remove the old filter. Finally, clean the housing of any debris and insert the replacement in the correct orientation.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the cabin air filter of the Fiat Grande Punto located?
Where is the cabin air filter of the Fiat Grande Punto located?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The cabin air filter has the function of preserving the health of the driver and occupants of the vehicle by allowing the air conditioning system to …
Removing the Cabin Air Filter on a Fiat Grande Punto
Removing the Cabin Air Filter on a Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to remove the air filter from a Grande Punto? Let’s see how to disassemble the pollen filter on a Fiat. Remove the cover located at the lower rig…
How to Replace the Cabin Filter on a Fiat Punto?
How to Replace the Cabin Filter on a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the cabin filter on a Fiat Grande Punto, remove the side cover located on the left side of the passenger footwell. Once this cover is remo…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos