Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Cabin Filter on a Fiat Grande Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Cabin air filter

In this video tutorial, you will see how to replace the cabin filter on a Fiat Grande Punto Evo by following some simple steps: First, purchase a new cabin filter; next, get inside the vehicle, switch off the engine, and pull the handbrake. The cabin filter in this vehicle is located inside the car, on the passenger side under the glove compartment, behind the left panel. Remove the left panel and take out the glove compartment; at this point, remove the cover of the filter box and take out the filter from its seat. Position the new cabin filter according to the arrow indications and reassemble all parts in reverse order.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To replace the cabin filter on a Fiat Grande Punto, remove the side cover located on the left side of the passenger footwell. Once this cover is remo…
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) How to change the air conditioning pollen filter on a Fiat Punto Evo? Remove the plastic cover of the centre tunnel (right side of the tunnel), then …
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) In this tutorial, you will see how to replace the cabin filter in a Fiat Grande Punto, a very simple and quick operation. Start by going to the passe…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the cabin filter on the Fiat Grande Punto? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos