Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Windscreen Washer Pump Fuse on a Fiat Punto?

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Pump

See other generations:
This video is currently unavailable

If the windscreen washer pump on your Fiat Punto suddenly stops working, first check the status of the respective fuse, which is located as shown in this video. The fuse in question is found in the fuse box inside the cabin, behind the dashboard panel on the driver's side.

It is labelled F43 and is rated at 20A. If faulty, ensure you replace it with a spare of the same specifications and always work with the vehicle turned off to avoid damaging any connected devices.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

Replacing the Windscreen Washer Pump on a Fiat Punto
Replacing the Windscreen Washer Pump on a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) Today, let's go through the instructions to remove and replace the windscreen washer pump on a Fiat Punto. First, remove the front left wheel by lift…
Replacing the Washer Pump of a Fiat Grande Punto
Replacing the Washer Pump of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Today's guide will show you the main instructions for removing and replacing the washer pump of a Fiat Grande Punto. First, locate the washer pump, w…
Disassembly and Repair of the Windscreen Washer Reservoir of the Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this video tutorial, you will learn how to disassemble and repair the windscreen washer reservoir of the Fiat Grande Punto, as well as the Punto E…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos