Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Fiat Ducato Van?

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin filter in a Fiat Ducato van is an extremely simple and quick task. First, enter the vehicle.

Remove the two small caps located on the lower central panel of the dashboard. Unscrew the two screws accessible from both holes along with the lower screw and separate the entire block.

Next, disconnect the rear power connector, remove the internal support, and open the long rectangular cover behind which the filter is located. Finally, insert the replacement filter, ensuring it is the correct way round.


Updated on 18 June 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter in a Fiat Ducato Van?
How to Replace the Fuel Filter in a Fiat Ducato Van?
Fiat Ducato (2006-2014 / X250) Replacing the fuel filter in a Fiat Ducato van, as shown in this tutorial, is a very simple and quick task. Before proceeding, wait for the engine to…
How to Replace the Cabin Filter in a Fiat Ducato?
How to Replace the Cabin Filter in a Fiat Ducato?
Fiat Ducato (2002-2006 / ) This video demonstrates how to replace the cabin air filter in the Fiat Ducato 2 van, a very simple operation. Start by opening the central glove com…
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Where to Find and How to Remove the Spare Wheel on a Fiat Ducato
Fiat Ducato (2006-2014 / X250) The spare wheel on your Fiat Ducato is located underneath the rear. Before you can start removing it, slightly lift the rear of the van. Begin by loo…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos