Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Wiper Blade Replacement

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Windshield wipers

This guide explains how to change the wiper blades on your car. The operation is quite simple; you will need a hex key and new blades to fit. Lift the metal arm and tilt the blade to form a T shape with the arm. Lever the clips holding the blade to release the movement and pull the old blade downwards. At this point, take the new blade and insert it into the exact position of the previous one. While keeping the blade in a T shape, push the blade upwards to secure it to the arm. You can then proceed in exactly the same way to replace the other front blade.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Punto wiper motor replacement
Fiat Punto wiper motor replacement
Fiat Punto (1999-2011 / 188, MK 2) Let's see in this video how to replace the wiper motor on a Fiat Punto. We pull the plastic lever located at the bottom left of the dashboard, lift t…
Replacement of the wiper motor on Fiat Punto
Replacement of the wiper motor on Fiat Punto
Fiat Punto (1999-2011 / 188, MK 2) Are our wipers not working as they should? Let's see in this video how to disassemble the wiper motor of a Fiat Punto. We pull the plastic lever loca…
Windscreen Wiper Motor Replacement
Windscreen Wiper Motor Replacement
Fiat Punto (1999-2011 / 188, MK 2) To access the wiper motor assembly, first remove the wipers along with their arms. Next, open the bonnet, disconnect the battery, and remove the plas…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos