Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How to change the time on the Fiat Panda

Fiat Panda - Video tutorial

Model: Fiat Panda - Years 2012-2021
Part: -board computer
Operation: How to change the time on the Fiat Panda

To be able to change the time on the car it is necessary to: locate the "set", "down arrow" and up arrow "commands located in the center of the center console. Press the set key several times until reaching the" set time "item. press the "set" key again to change the time by scrolling with the "down arrow" and "up arrow" keys. Once the new time has been set, press the "set" key again to memorize it. Then proceed in the same way to change the minutes or, using the "up arrow" and down arrow "keys, set the new time and then press the" set "key to memorize.


Posted on 2 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2021 - How to turn off the tire warning light in Fiat Panda? Read Answer
    • Panda 2012-2023 - Why does the Fiat Panda's Blue Me system not work? Read Answer
    • Panda 2003-2012 - What does the Fiat Panda engine light indicate? Read Answer
    • Panda 2012-2021 - Where is the Blue & Me system control unit located in the Fiat Panda? Read Answer
    • Panda 2012-2023 - What does the warning light with the exclamation point and the yellow car mean in the Fiat Panda? Read Answer
    • Panda 2003-2012 - What does the pious Esc on the Fiat Panda mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos