Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Bumper Disassembly Instructions

Model: Fiat 500 312 - Years 2007-2024
Part: Front bumper

Disassembling the front bumper is quite simple and does not require special tools. Start by opening the front bonnet and unscrewing the four screws that secure the bumper to the slam panel. Then access the wheel arches and remove both the screws along the edges and the inner one that secures the corner of the bumper to the wing. Finally, remove the screws along the lower edge at the front, unclip the edge connecting the bumper to the wing, and complete the disassembly by pulling it forward and disconnecting the side indicator and fog light connectors.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Instructions for Removing the Front Bumper on Abarth 595 - Fiat 500
Fiat 500 (2014-2022 / 500 X) In today's video, you will see the main instructions on how to remove the front bumper from an Abarth 595 and Fiat 500. First, start by unscrewing al…
How to Remove the Logo from the Front Bumper of a Fiat 500
How to Remove the Logo from the Front Bumper of a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the logo from the front bumper of a Fiat 500? Once you have opened and lifted the front bonnet of the car: unscrew the securing screws …
Removing the Front Bumper of a Fiat 500
Removing the Front Bumper of a Fiat 500
Fiat 500 (2007-2024 / 312) In this video, see how to remove the front bumper of a Fiat 500. Lift the bonnet and secure it. Using a battery-powered screwdriver, undo the securin…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos