Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service light on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Service warning light

To reset the Service light, you need to connect a diagnostic tool to the vehicle's OBD port, as the operation cannot simply be performed from the onboard computer. The port is located below the steering column, behind a specific plastic panel: after connecting the scanner, select the model and version of the car, then proceed with the reset following the instructions shown in the tutorial. Once the reset has occurred, you can disconnect the scanner and check the new maintenance interval from the onboard computer.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you perform the service and reset the service light in the Fiat 500 X?
How do you perform the service and reset the service light in the Fiat 500 X?
Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
How to Reset the "Service" Light on a Fiat 500
How to Reset the "Service" Light on a Fiat 500
Fiat 500 (2012-2023 / 500 L) Before you can start the reset, ensure that the service has been carried out, then sit in the driver's seat of your Fiat 500. Begin by activating the…
How to Reset the Service Light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this brief and simple guide, you will see a quick and easy method to reset the service light for the routine maintenance oil change on the Fiat 50…

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos