Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in a Fiat Grande Punto?

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Antifreeze coolant

In this tutorial, you will see how to replace the coolant in a Fiat Grande Punto, a very simple operation to perform periodically. Before proceeding, ensure that the engine is completely cold to operate safely. Start by opening the bonnet, then remove the cap from the expansion tank, place a container underneath the engine, and open the lower tap. Once all the old coolant has drained out, close the tap and add the necessary amount of coolant through the upper opening. Optionally, you can perform an internal flush using distilled water.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Coolant in a Fiat Punto?
How to Replace the Coolant in a Fiat Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before starting, you need to open the front bonnet of your Fiat Punto. I strongly recommend performing this operation with the engine cold. Begin by …
How to Replace the Coolant in a Fiat Punto
How to Replace the Coolant in a Fiat Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Before you can start, open the bonnet of your Fiat Punto. It is strongly advised to perform this operation with the engine cold. Begin by unscrewing …
How to Replace the Radiator Fluid in a Fiat Punto
How to Replace the Radiator Fluid in a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this video, see how to replace the radiator fluid in a Fiat Punto. Disconnect the lower radiator hose using a socket wrench, allowing the rusty fl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos