Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2022
Part: Tail light bulb

In this brief and simple guide, follow the steps necessary to remove and replace the rear headlamp bulb on a Fiat 500. First, open the boot and start unscrewing the two securing screws located next to the lamp; then disconnect it from the bodywork by unplugging the bulb connector found at the back, as shown in the video. At this point, separate the bulb holder from the housing to remove and replace the faulty bulb; then refit the new one and install the rear lamp!

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
How to Replace the Rear Light Bulb of the 2015 Fiat 500 L
Fiat 500 (2012-2023 / 500 L) Replacing the rear light bulb of the 2015 Fiat 500 L is a straightforward task that you can do independently. First, open the boot. Next, remove the …
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Rear Light Bulb on the Fiat 500?
How to Replace the Rear Light Bulb on the Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the rear light bulb on the Fiat 500, open the rear hatch to access the screws securing the light unit. Once these screws are loosened, you…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos