Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to replace the cabin air filter on a Fiat 500 Abarth

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Cabin air filter
Operation: How to replace the cabin air filter on a Fiat 500 Abarth

To replace the cabin air filter or the pollen filter on the car, we can refer to the instructions below and to the indications given in the video. The first thing you need to do is access the passenger compartment from the passenger side using a screwdriver to remove the plastic panel located near the central console under the dashboard. Under this panel there is the compartment containing the filter in order to access the filter it is necessary to remove the two screws that support the cover. Then extract the filter and replace it with a new one, always referring to the specifications of the spare part which must be compatible with the car. Then close the filter housing cover and reassemble the plastic panel with the screws.


Posted on 17 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - Where is the cabin air filter located in the 2014 Fiat 500L? Read Answer
    • 500 2012-2021 - Where is the pollen filter located in the Fiat 500 L? Read Answer
    • 500 2014-2022 - Where is the cabin filter located in the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the cabin air filter located on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500X located? Read Answer
    • 500 2012-2023 - Where is the pollen filter of the Fiat 500L located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500x located? Read Answer
    • 500 2014-2022 - Where is Fiat 500 x cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos