Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front turn signal bulb on a Fiat 500?

Model: Fiat 500 312 - Years 2007-2022
Part: Side turn signal light bulb

In order to replace the front indicator light bulb on the Fiat 500, you need to pry with an object so that the corresponding light can be removed from inside its housing: once this light has been extracted, it will be possible to disconnect the connectors which can be found inside it, also by removing the corresponding bulb. After the old bulb has been removed, it will be possible to insert the new one, connecting it to the corresponding connector. Then you can put the light back in its housing, checking that everything works correctly.


Posted on 1 September 2024 by ScegliAuto



How to remove the rear turn signal bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the rear taillight of the Fiat 500 Abarth. F
How to replace the front turn signal bulbs in the Fiat 500?
Fiat 500 (2007-2024 / 312) In this tutorial we can see how to replace the front turn signal bulbs in the Fiat 500, an extremely simple and quick operation. First of all, make s
How to replace the Fiat 500 turn signal light bulb?
Fiat 500 (2007-2021 / 312) In order to replace the Fiat 500 turn signal bulbs, the wheels must be rotated on the opposite side from that of the bulb to be replaced. Once the wh

How to remove the telepass holder from the windshield

Today we will explain how to remove the telepass holder from a vehicle's windshield. Removing the telepass holder from the windshield is a very simple and quick operation to perform independently, you just need to use nylon thread that you will need to pull towards the holder and pass it between the holder and the clip. After performing this operation, the holder will be removed. There may be glue residues on the windshield that can be removed with a solvent suitable for glass cleaning. After cleaning everything, it is possible to mount another telepass holder on the windshield in the same position as the one removed or elsewhere.

Watch the video!


by ScegliAuto

More videos