Do it yourself
| ||||
|
Fiat 500 - Video tutorial
Model: Fiat 500
312
- Years 2007-2022 If the tire warning light comes on on the instrument panel of your new Fiat 500e even though there is no puncture, don't worry because you just need to carry out this simple manual reset procedure. First, start the ignition and navigate the on-board computer menu until you find the "Vehicle Info" item. At this point, locate the "Tyre Pressure" item and press and hold the "OK" button located on the left side of the steering wheel. As soon as the completion of the warning light reset is confirmed, release the button and switch off the instrument panel.
Posted on 27 December 2022 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.035
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |