Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Treat the Engine of the Fiat Panda 1.3 Multijet 75 hp with Metalux XMulti

Model: Fiat Panda 319, MK 3 - Years 2012-2026

In this video, you will learn how to treat the engine of the Fiat Panda 1.3 Multijet 75 hp with Metalubs XMulti. While waiting for Protex, this is an excellent product to use on this model as well. In the video, you can hear the noise produced by the engine when untreated. Placing the sound level meter on the engine, you will see it registers around 85/90 decibels. Now insert the Metalubs XMulti treatment into the designated nozzle; pour all the contents of the package and close the cap. After that, take a drive to allow the product to work. Once the drive is finished, check the engine noise again with the sound level meter.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Fiat Panda 1.3 MultiJet
How to Reset the Service Light on Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also a…
Guide to Removing the Turbocharger from the Fiat Panda 1.3 MultiJet
Guide to Removing the Turbocharger from the Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) This guide outlines the main steps to carry out the overhaul of the turbocharger on the second series Fiat Panda with a 1.3 MultiJet engine. First, o…
How to test and clean the EGR valve of the Fiat Panda 1.3 Multijet
How to test and clean the EGR valve of the Fiat Panda 1.3 Multijet
Fiat Panda (2003-2012 / 169, MK 2) Today in this guide, we will see the instructions that will allow us to test and clean the EGR valve of the Fiat Panda 1.3 Multijet. First, we open t…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos