Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Splash Guard on the Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

Let's see how to replace the splash guard on a Punto Evo. You can easily find it on any e-commerce platform for just under £15.00 (+ shipping costs). First, lift the vehicle and remove the wheel, then take out the screws holding the element in place.

If the splash guard is damaged, you may need to use pliers. It’s better to remove the front part first.

Now, refit the splash guard inside the bodywork, bending it so that it clips back into place. At this point, replace all the nuts and the job is complete.

Refit the wheel and you’re done.


Updated on 5 July 2026 by ScegliAuto


Related tutorials

How to Remove the Splash Guard on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Prepare to remove and replace the splash guard on a Fiat Grande Punto: lift the car on a column lift or jack, then remove the front wheel. Use a scre…
How to Remove the Timing Belt of a Fiat Punto
How to Remove the Timing Belt of a Fiat Punto
Fiat Punto (1999-2011 / MK 2, 188) In this detailed video, learn how to remove and replace the timing belt and tensioner on a Fiat Punto. Use a socket to remove the water pump located …
How to Remove the Rear Shock Absorber on a Fiat Grande Punto
How to Remove the Rear Shock Absorber on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) How to remove the rear shock absorber on a Fiat Grande Punto? Follow these steps: loosen the wheel nuts, lift the car on a column lift, and remove th…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos